Products / Hydraulic powder presses / S

S Series from Komage:

Solutions for individualists

Komage builds presses with individual capabilities, tailor-made for your task – and not off the shelf. The high-performance hydraulic presses of the S Series operate based on the ejection principle and are available with pressing forces from 50 kN to 12,000 kN for a maximum of 9 closed-loop controlled pressing axes. 
Due to their versatility, the machines of the S Series are equally suitable for the production of simple part geometries in large numbers and also for highly complex pressing tasks.

 

S

The "mother"of
the S Series

S-XT

Press system Tungsten

S-DT

Press system Dental

S-ML

Press system
Multi-layer

S-KHA

Press system
Withdrawal
ejection / 
withdrawal		 ejection ejection ejection withdrawal Method
50 - 12000 kN 50 - 300 kN 700 - 1500 kN 50 - 12000 kn 50 - 12000 kN Press force range
50 - 1000 mm 50 - 200 mm 50 - 200 mm 50 - 1000 mm 50 - 1000 mm Filling depth
±0,1 - ±0,002 mm ± 0,002 mm ± 0,01 mm ± 0,01 mm ± 0,01 mm Positioning accuracy
max. 9 max. 5 max. 4 max. 9 max. 9 No. of controlled pressing axes
max. 600 mm/s max. 600 mm/s max. 350 mm/s max. 600 mm/s max. 600 mm/s Max. speed - press axis
max. 1200 mm/s max. 1200 mm/s max. 1200 mm/s max. 1200 mm/s max. 1200 mm/s Max. speed - additional axis
optional optional optional Applied load
optional optional optional optional Core rod (controlled)
optional optional optional Automation
optional optional - optional 2nd filling box
optional optional optional optional Preparation for quick-change
optional optional optional KOMPART program generator
optional optional optional Automatic filling level correction

Advantages of the
ejection process 

The ejection process offers additional advantages compared to the withdrawal process, such as:

  • 100% pressing force on the upper and lower pressing axis
  • The ejection force is up to 100% of the pressing force
  • The height of the die table is fixed - this makes it easier to create a pressing program and integrate a pressed part handling system
  • Independent pressure relief for each axis during demolding in both directions possible, as there are no fixed stops
  • Maximum flexibility when filling for optimal filling density distribution
  • Reduced powder segregation due to purely horizontal movement of the filling device